MOGUL PARAMO HM 46

MOGUL PARAMO HM 46….10L

Technical informationsPARAMO HMISO VG 22, 32, 46, 68, 100 HYDRAULIC OILS FOR HEAVILY LOADED HYDROSTATIC SYSTEMS

Describtion:

PARAMO HM are high quality hydraulic oils of HM class.

The base, highly refined oils used in this product are produced by means of a special hydrogenation technology.

They contain admix-tures containing anti-oxidation, anti-corrosion, anti-wear and anti-foaming additives.

They also contain additives that enhance low-temperature properties and viscosity-temperature dependence

Application:

These oils are designed especially for high pressure hydrostatic systems equipped with hydro-generators that impose high requirements on the anti-abrasion effects (lamella, axial and radial-piston types) and thermo-oxidative stabili-ty of the oil.

They also can be used in mobile hydraulic sys-tems working in all-season mode in non-protected enviroment, for luricating of loaded circulation systems, gear-type transmissions etc. Another application of this hydraulic oils is „oil mist“ lubricating.

The typical applications of the individual viscosi-ty categories of these oils are:PARAMO HM 22 – systems operated in very low temperature conditions (especially winter operations)

PARAMO HM 32 – systems operated in low temperature conditions (winter, all-season ope-rations)

PARAMO HM 68 – systems operated in regular conditions (mainly summer operations)

PARAMO HM 100 – systems operated in ex-tremly high temperatures, special aplications Classification, specification: ISO 6743/4HMDIN 51 502 HDIN 51 524 part II HLP CETOP RP91H ISO TC 28/SC 4 Characteristic properties:

•excelent anti-wear protection of lubricated systems

•premium anti-corrosion properties

•especial anti-oxidation properties guaran-tees long service life

•does not have any corrosive effects on elas-tomers

•very good air-separation and de-emulsifying properties

• minimum foamability

•very good thermal-viscosity characteristics •excellent shearing stress resistance

•premium filterability

Technical informations

Physical and chemical properties Value Parameter Unit HM 22 HM 32 HM 46

Test methodDensity at 20 °C kg/m3865 868 860 EN ISO 3675

Kinematic viscosity at 40 °C mm2/s 22 32 46 EN ISO 3104

Viscosity index 100 110 115 ISO 2909

Flash point °C 190 200 225 EN ISO 2592

Pour point °C -42 -36 -27 ISO 3016 FZG test,

non-conforming grade 11 11 11 DIN 51 354

Value Parameter Unit HM 68 HM 100

Test methodDensity at 20 °C kg/m3867 875 EN ISO 3675

Kinematic viscosity at 40 °C mm2/s 68 100 EN ISO 3104

Viscosity index 110 100 ISO 2909

Flash point °C 240 250 EN ISO 2592

Pour point °C -24 -21 ISO 3016 FZG test,

non-conforming grade 11 11 DIN 51 354

The values shown in the table are typical of current production.

For binding parameters and other product information see TN 23-148 PARAMO,

a.s. and the respective Safety Data Sheet.